PELSTAT Quality ESD safe products
Our Product Range
Mats-ESD Safe

"POP" Bench Mat

Blue "POP" personal operator pad mat designed for use over conductive or static-dissipative laminates.

  • •Requires no additional grounding if used directly over
    conductive or static-dissipative laminates.
  • Comfortable to work on.
  • Cushions fragile components from damage.
  • Lays flat.
  • Non-slip.
  • Suitable for use in EPA's providing it is located on a
    surface connected to ground.
  • Resistance to ground 1.0 x 109Ω.
  • Charge Decay 1000V to 50V in less than 0.5 sec.
  • 6.4 mm (0.25 in.) thick.
  • Conforms to IEC 61340-5. 
Part No Description Size (")
75416 POP Bench Mat 15" x 18"
75418 POP Bench Mat 18" x 23"
75420 POP Bench Mat 52" x Running Ft.
75422 POP Bench Mat 52" x 40 Roll

 

Blue Buried Layer Bench Mat

  • Static dissipative top and bottom layers
  • Buried conductive layer Consists of three layers, static dissipative top and bottom surfaces and a conductive inner layer. The buried conductive layer (103–104Ω) is inaccessible except through a properly installed groundable snap. This feature reduces potential for damage from a spark induced EMP and ensures employee safety.
  • Resistance to ground 1.0 x 109Ω
  • Very high temperature resistance – resistant to solder
    drips
  • Meets or exceeds MIL-W-87893A, IEC 61340-5,
    DOD-HDBK-263,DOD-STD-1686
Part No Description Size (Ft)
75400 Bench Mat Blue 4 x 2
75402 Bench Mat Blue 4 x 3
75404 Bench Mat Blue 4 x Running Ft.
75406 Bench Mat Blue 4 x 20 Roll

 

Field Service Mats & Kits

  • Provides static shielding from charges on floors and work surfaces as well as completely protecting sensitive parts if wrapped in the mat. Mat measures 24" x 24", with 2 handy 8" x 12" pockets. Kit includes one mat, a 15ft common point ground wire, a 6ft coil cord and a fabric adjustable wrist band. Pouch available.
    Conforms to IEC 61340-5.
Part No Description
75462 Mat with Wriststrap and ground Cord
75464 Pouch only
75466 Complete kit including pouch

 

Anti-Fatigue Floor Mat

Grey static-dissipative mat For use ­wherever people stand at their work for prolonged periods, and/or where static control is required.
  • Reduces fatigue caused by prolonged standing by up to
    50% (compared to hard floors).
  • Insulates feet from cold and vibration.
  • Anti-slip.
  • Lays flat with no adhesive or fixing.
  • When tested to IEC 61340-5, suitable for use in EPA's
    providing not used as principal means of grounding the
    operator.
  • Resistance to ground 1.0 x 109Ω
  • Charge Decay 5000V to 50V in less than 0.75 sec.
  • 9.5 mm (0.375 in.) thick.
Part No Description Size (Ft)
75424 Anti-Fatigue Flooring 3 x 2
75426 Anti-Fatigue Flooring 3 x 5
75428 Anti-Fatigue Flooring 3 x Running Ft.
75430 Anti-Fatigue Flooring 3 x 60 Roll

 

Grey & Blue Dissipative Bench Mats

Grey and Blue Bench Mats made from synthetic rubber for use where static control is required. Made from a 2 layer material with a dissipative top. Backing layer is 104 –105 Ohms/sq.
  • Resistant to solder spillage and splashing.
  • Excellent lay flat properties.
  • Anti-slip.
  • Volume Resistance: 105 –107
  • Surface Resistance: 108 –1010
  • Decay Time 0.009 sec (5000V 10% of Discharge)
  • 2.0 mm thick.
  • Conforms to IEC 61340-5.
Part No Description Size (Ft)
75472 Dissipative Bench Mat Grey 4 x 2
75474 Dissipative Bench Mat Grey 4 x 3
75476 Dissipative Bench Mat Grey 4 x Running Ft.
75478 Dissipative Bench Mat Grey 4 x 33 Roll
75482 Dissipative Bench Mat Blue 4 x 2
75484 Dissipative Bench Mat Blue 4 x 3
75486 Dissipative Bench Mat Blue 4 x Running Ft.
75488 Dissipative Bench Mat Blue 4 x 33 Roll

 

Dissipative Bench Mat

Beige and Green Bench Mats made from synthetic rubber for use where static control is required. Made from a 2 layer material with a dissipative top. Backing layer is 104 –105 Ohms/sq.
  • Resistant to solder spillage and splashing.
  • Excellent lay flat properties.
  • Anti-slip.
  • Volume Resistance: 105 –107
  • Surface Resistance: 108 –1010
  • Decay Time 0.009 sec (5000V 10% of Discharge)
  • 2.0 mm thick.
  • Conforms to IEC 61340-5.  
Part No Description Size (Ft)
75444 Dissipative Bench Mat Beige 4 x 2
75446 Dissipative Bench Mat Beige 4 x 3
75448 Dissipative Bench Mat Beige 4 x Running Ft.
75450 Dissipative Bench Mat Beige 4 x 33 Roll
75492 Dissipative Bench Mat Green 4 x 2
75494 Dissipative Bench Mat Green 4 x 3
75496 Dissipative Bench Mat Green 4 x Running Ft.
75498 Dissipative Bench Mat Green 4 x 33 Roll

 

Buried Layer Floor Mat

  • Dark grey static-dissipative floor mats.
  • Suitable as grounding surface in EPA's.
  • Hard-wearing and easy to clean.
  • Comfortable to stand on. • Anti-slip.
  • Lays flat with no adhesive or fixing.
  • Resistant to castor chairs.
  • Resistance to ground 5.0 x 107Ω
  • Surface Resistivity 1.2 x 108Ω
  • Charge Decay 1000V to 50V in less than 0.5 sec.
  • 3.2 mm (0.125 in.) thick.
  • Conforms to IEC 61340-5. 
Part No Description Size (Ft)
75434 Buried Layer Floor Mat 3 x 2
75436 Buried Layer Floor Mat 3 x 4
75438 Buried Layer Floor Mat 3 x 5
75440 Buried Layer Floor Mat 3 x Running Ft.
75442 Buried Layer Floor Mat 3 x 50 Roll

 

Buried Layer Bench Mat

Grey Static-dissipative series 2 bench mat, suitable for use in ESD-protected areas as a grounding surface.
  • Reliable electrical performance at a budget price.
    Grey in colour.
  • Lightweight, yet with superior lay-flat characteristics.
  • Deep cushioned base layer for operator comfort and
    protection of fragile components.
  • Resistance to ground 1.9 x 107Ω @ 10V
    1.6 x 107Ω @ 100V
  • Surface Resistivity 4.7 x 107Ω @ 10V
    3.2 x 107Ω @ 100V
  • Charge Decay 1000V to 50V in less than 0.5 sec.
  • 2.3 mm (0.930 ") thick
  • Conforms to IEC 61340-5.
Part No Description Size (Ft)
75408 Dissipative Bench Mat Grey 4 x 2
75410 Dissipative Bench Mat Grey 4 x 3
75412 Dissipative Bench Mat Grey 4 x Running ft.
75415 Dissipative Bench Mat Grey 4 x 20 Roll

 

Static Dissipative Floor Mat

Dark grey rubber floor mat made of a conductive bottom- layer and a dissipative top-layer, made of a compound with interspersed multicoloured flecks.
  • Resistant to chemical agents normally used for
    maintenance, and cigarette burns.
  • Comfortable to stand on.
  • Anti-slip.
  • Lays flat with no adhesive or fixing.
  • Resistant to oils.
  • Resistance to ground 106 – 108Ω
  • Surface Resistivity 106 – 109Ω
  • 3.5 mm thick.
Part No Description Size (Ft)
75540 Dissipative Floor Mat 4 x 3
75542 Dissipative Floor Mat 4 x 4
75544 Dissipative Floor Mat 4 x Running Ft.
75546 Dissipative Floor Mat 4 x 33 Roll

 

Anti-Fatigue Anti-Static Mats

  • Shock-absorbent foamed polyurethane mats in anthracite black colour
  • Retain shape and elasticity
  • Stimulate circulation in lower body and legs
  • Reduce cramp and circulation problems
  • Lessen fatigue in feet, back and lumbar region
  • Non-slip surface
  • Extremely high resistance to wear and tear
  • Static-safe – ESD to ground: 5.3 x 108Ω – 1.3 x 109Ω
  • Five year guarantee
  • Standard or custom shaped mats available
  • Conforms to IEC 61340-5
Part No Description Size (cm)
75500 Anti-Fatigue Anti-Static Mat 60 x 90
75501 Anti-Fatigue Anti-Static Mat 60 x 180
75502 Anti-Fatigue Anti-Static Mat 60 x 270
75503 Anti-Fatigue Anti-Static Mat 90 x 120
75504 Anti-Fatigue Anti-Static Mat 90 x 180
75505 Anti-Fatigue Anti-Static Mat 90 x 240

 

Anti-Fatigue Static Conductive Mats

  • Shock-absorbent conductive mats made from high­quality nitrile rubber. Black in colour
  • Retain shape and elasticity
  • Stimulate circulation in lower body and legs
  • Reduce cramp and circulation problems
  • Less fatigue in feet, back and lumbar region
  • Non-slip surface
  • Extremely high resistance to wear and tear
  • Static Conductive – ESD to ground: 5 x 104 Ω
  • Five year guarantee
  • Standard or custom shaped mats available
  • Conforms to IEC 61340-5 
Part No Description Size (cm)
75510 Conductive Anti-Fatigue Mat 60 x 90
75511 Conductive Anti-Fatigue Mat 60 x 180
75512 Conductive Anti-Fatigue Mat 60 x 270
75513 Conductive Anti-Fatigue Mat 75 x 112
75514 Conductive Anti-Fatigue Mat 75 x 224
75515 Conductive Anti-Fatigue Mat 75 x 336